Installations
Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
Place a drain pan under the oil filter and unscrew oil filter.
Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
Apply film of clean oil to filter gasket. Do not use grease.
Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
Check owner’s manual for correct oil specification viscosity and amount.
Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Description
ARS Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, ARS Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
Proven protection for up to 10,000 miles (16,000 kilometers)
Engineered for use with synthetic or conventional motor oils
SureGrip® technology for easy install and removal
Filter media is a blend of fiber and resin that captures 95% of the dirt particles
Silicone anti-drain back valve helps ensure safe engine start up
*ARS Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
Reviews
There are no reviews yet.